Universal Presentation Processor
Resource Management
12 ¥ UPX-2: Universal Presentation Processor
"Button Properties" – Graphic Tab
The following dynamic graphics properties can be assigned to an object in VT Pro-e:
•
A serial join for file path
•
An analog join for error reporting
•
A default file path
•
An auto refresh rate (1 to 65535) in seconds
At design time, either a serial path join or a default path can be assigned. If a serial
join is assigned, the default path will be disabled.
At run time, if a default file path is assigned, the file will be loaded when the project
is loaded. Whenever a file path is sent to the panel from the control system via the
serial join, the image file will be loaded immediately and the image will be displayed
right away if the object is currently visible.
If an auto refresh rate is set, the image will be automatically refreshed periodically.
The following four image types are supported:
•
.bmp
•
.jpg
•
.png
•
.gif
For best results in displaying the dynamic graphics, the original image size should be
the same as the desired display size.
Note that dynamic graphics resource management will not affect the original project.
Thus, rebooting the device will trigger the original project to load.
Crestron UPX-2
Reference Guide – DOC. 6286A