VTech VDP650 User Manual page 42

To create a conference with a held call:
1. If you are on an Active call and also have a call on hold, press SELECT.
2. Press to scroll to Conference and press SELECT.
q
to scroll to A held party, and then press SELECT.
3. Press
q
A list of held calls will appear.
4. Press
q or p
SELECT.
5. Press CONF
The conference will begin immediately.
Press CANCEL to terminate both calls and end the conference.
To set up a conference call with another handset / deskset in your system:
1. During a call, press SELECT.
2. Press to scroll to Conference and press SELECT.
q
3. Press to scroll to A handset party, then press SELECT.
q
4. Press
q or p
5. When the second call is established, press SELECT and press
Conference, then press SELECT.
The conference begins and the conference screen appears.
Press END
connected to each other.
to select a held call you want to conference with, then press
.
to select a handset or deskset, then press SELECT.
to exit the conference. The two other callers remain
â
SELECT
â
CONF.
â
SELECT
42
to scroll to
q