VTech VDP650 User Manual page 20

To install the handset battery:
1. Plug the battery connector securely into the socket inside the handset battery
compartment. Insert the supplied battery with the label THIS SIDE UP facing
up as indicated.
2. Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
3. Charge the handset by placing it face forward in the charger. The battery icon
indicates the charge status as the battery charges.
Very low battery charging
less than 30 minutes.
IMPORTANT INFORMATION
• Use only the supplied rechargeable battery or replacement battery
(model BT264392). To order a replacement battery, visit our website at
businessphones.vtech.com
• If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
Charging 30 to 80 minutes.
Charging 80 minutes
to 7 hours.
Charging more than 7 hours.
Fully charged at 11 hours.
1 (888) 370-2006
or call
20
.