Installation; Positioning The Projector; Adjustable Feet - Eiki LC-XB100A Owner's Manual

Hide thumbs Also See for LC-XB100A:
Table of Contents

Advertisement

Installation

Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
✔ Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
2.3'(0.69m)
Adjustable Feet
Projection angle can be adjusted up to 12.0 degrees with
the adjustable feet.
Lift the front of the projector and press the feet lock latches
on both side of the projector.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (see pages 25, 47-48).
23.7'(7.23m)
15.8'(4.81m)
11.8'(3.6m)
7.8'(2.39m)
30"
62"
30"
2.3'(0.69m)
7.8'(2.39m)
3.7'(1.14m)
12.7'(3.88m)
124"
93"
11.8'(3.6m)
15.8'(4.81m)
19.1'(5.83m)
Adjustable Feet
186"
A
B
23.7'(7.23m)
---
---
Feet Lock Latches
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-xb200a

Table of Contents