Computer Input; Input Source Selection (Rgb: Computer 1/Computer 2(Analog)) - Eiki LC-XB100A Owner's Manual

Computer Input
Input Source Selection (RGB: Computer 1/Computer 2(Analog))
Direct Operation
Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point ed
1 or Computer 2 and then press the Point
access the submenu items.

When Computer 1 is selected, use the Point
buttons to select RGB and then press the SELECT
button.
When Computer 2 is selected, use the Point
buttons to select RGB(Analog) and then press the
SELECT button.
Note:
✔
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.47).
COMPUTER button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
ed buttons to select Input and
or the SELECT button.
8
buttons to select either Computer
8
Top Control
INPUT button
Input Menu
button to
ed
ed
Computer
1
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
NTSC
RGB(PC digital)
29