Table of Contents
Advertisement
Video Input
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
ed
then press the Point
Use the Point
ed
RGB(Scart) and then press the SELECT button.
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
✔ Note:
When the Input Search function is set to On1 or On2,
the input signal will be searched automatically (p.47).
40
COMPUTER button
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
buttons to select Input and
ed
8
or the SELECT button.
buttons to select Computer 1 and
8
button.
buttons to select Component or
Top Control
INPUT button
Input Menu
Computer 1 ( RGB)
/(Component) / (Scart)
Computer 2 (PC digital) /
(AV HDCP) /
(Analog)
Video
S-video
RGB(PC digital)
RGB(PC digital)
Advertisement
Table of Contents
