Table of Contents
Advertisement
Computer Input
Custom
Adjust the screen scale and position manually with this
function.
Press the Point
button at Custom and the Custom is
8
displayed on the screen, you can use the Point
to choose the item you want to adjust.
Scale H/V .......... Adjust the Horizontal/Vertical screen
scale.
H&V . .................. When set to On, the aspect ratio is
fixed. The Scale V appears dimmed and
becomes unavailable. Adjust Scale H,
then the screen scale is automatically
modified based on the aspect ratio.
Position H/V ..... Adjust the Horizontal/Vertical screen
position.
Common ........... Save the adjusted scale or position to all
the inputs. Press the SELECT button at
Common to display a confirmation box.
To save the scale or position, press the
SELECT button at yes. When Custom
is selected, the saved scale or position is
used.
Reset . ................ Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at yes.
For zooming in and out the images
Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
D . zoom + appears. Press the SELECT button to expand the
image size. Use the Point
The Panning function can work only when the image is larger
than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
or the SELECT button on the remote control.
e
Digital zoom –
Select Digital zoom –. The On-Screen Menu disappears and
D . zoom – appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing the
D.ZOOM
or the SELECT
d
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
buttons, SELECT and Point buttons.
ed
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
29-30) again, or adjust the screen size with the D.ZOOM
buttons.
ed
8
buttons
ed
7 8
buttons to pan the image.
ed
button on the remote control.
✔ Note:
• When no signal is detected, Normal is set
automatically and the Aspect dialog box
disappears.
• The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
Remote Control
POINT buttons
SELECT button
D .ZOOM + button
D .ZOOM - button
✔ Note:
• The panning function may not operate
properly if the stored Mode in the PC
adjust Menu is used (p.34).
• The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
• True, Full, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p or
575p is selected in the PC System Menu
(p.31).
• Digital zoom +/- cannot be selected
when Full or True is selected.
• When Custom is selected, the Digital
zoom - function is disabled.
Advertisement
Table of Contents
