Resuming Playback From Where You Stopped; Stopping Playback And Switching Power Off - Pioneer DV-636D Operating Instructions Manual

Resuming Playback from
Where You Stopped
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP 7 once.
The display shows "RESUME" and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY 3 is pressed again. The
display shows the disc type (DVD or Video CD).
Press PLAY 3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 52).
28
– DVD/Video CD
Stopping Playback and Switching
Power Off
– DVD/Video CD/CD
4, 4 4
AUDIO
SETUP
DISPLAY
¶
2
PREV
4
¶
7
1
STOP
e
STEP/SLOW
1
4
4 4 , 5
3
D VD PLA YER
5.1CH FL OFF
VIRTUAL
DOLBY
STANDBY
DIGITAL
SUB 5.1CH
POWER CENTER SURROUND WOOFER MODE
DOLBY DIGITAL/DTS DECODER
– OFF - ON VIRTUAL DOLBY AUDIO SUBTITLE FL
DIGITAL DIMMER
1
Press STOP 7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE (0 on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press on the remote control to put the
player in standby.
The disc tray goes back in and the standby indicator
lights.
4 4
Press on the front panel ( on the
remote control). (Taiwanese model)
5
Press POWER on the front panel. (except
for Taiwanese model)
The player turns off.
OPEN/
CONDITION CLOSE
LAST
2
MEMORY MEMORY
REPEAT
SUB TITLE ANGLE
REPEAT
A-B
MENU TOP MENU
RETURN
¶
5 5
3
NEXT
¢
∞ ¶
3 8
PLAY PAUSE
¶
1 ¡
E
REV FWD
2 3 CLEAR
5 6 +10
¶
2
Î
0
4 1 ¡ ¢
7 8
A COUSTIC D AMPER MECHANISM
1
3