Overview Of Functions; Registration - Fluke TS 100 PRO User Manual

TS
®

Overview of Functions

The TS100 PRO Cable Fault Finder with PowerBT
bridge tap detection is a portable, handheld TDR
device used by installers, repair technicians and other
authorized personnel for detecting bridge taps,
locating problems on installed cable pairs, and
managing cable inventory. This enhanced version of
the TS100 Cable Fault Finder has improved technology
that lets technicians qualify, troubleshoot, and repair
copper facilities that support high-speed VDSL services.
The TS100 PRO Cable Fault Finder includes the
following features and functions:

Easy to use

Tests all common cable pairs

Provides low cost protection against lost time due
to cable and connector problems

Accurate to ±2 feet (±0.6 meters) for cables less
than 30 feet (9 meters)

Accurate to ±5 feet (±2 meters) for cables longer
than 10 feet (3 meters) and shorter than 200 feet
(60 meters)

Accurate to ±3%, ±5 feet (±2 meters) for cables
longer than 200 feet (60 meters)

Bright 0.4 inch (1.016 centimeters) LED display

Up to 4 readings per second

Audible indication of shorted wires and external
voltage greater than 90 volts AC or 100 volts DC

Automatic adjustments
100 PRO Cable Fault Finder
™

Tone injection with the SmartTone™ positive
identification system

The input is protected up to 250 volts for
accidental connections to a power source

Components protected against damage from
moisture

Fifty hour battery life, intelligent power-down

Low battery indicator

Uses 4 AA batteries (included)

High strength plastic (ABS) housing

Registration

Registering your product with Fluke Networks gives
you access to valuable information on product updates,
troubleshooting tips, and other support services. To
register, fill out the online registration form on the
Fluke Networks website at
registration.
www.flukenetworks.com/
1