Table of Contents
Advertisement
TS100 PRO Cable Fault Finder
Users Guide
How to Clean the Tester
To clean the display, use lens cleaner and a soft, lint-
free cloth. To clean the case, use a soft cloth that is
moist with water or water and a weak soap. Do not
use petroleum-based or chlorinated cleaning agents.
Do not use CRC Cable Clean
chlorinated solvent on the test set. Doing so
will damage the tester.
Test leads, ABN with piercing-pin-clips
Test leads with alligator clips
Test leads with angled bed of nails
TS100 PRO pouch with belt clip
Specifications
Maximum Length
8,000 feet (2,438 meters) on certain cable types, 4,000 feet (1,220 meters) on most cable
types, and 500 feet (152 meters) on cables with high loss. The tester shows -
too long to be correctly measured.
Representative
8,000 feet (2,438 meters): CAT-3 Twisted Pair
Maximum Cable
8,000 feet (2,438 meters): CAT-5 Twisted Pair
Length
6,000 feet (1,830 meters): 12/2 AC Wire
3,000 feet (900 meters): RG-6/U TV Coax
1,500 feet (457 meters): RG-174/U Coax
Minimum Length
No minimum length. Minimum non-zero reading is 2 feet or1 meter
Length Accuracy
±2 feet (±0.6 m) for cables less than 10 feet (3 m)
±5 feet (±2 m) for cables longer than 10 feet (3 m) and shorter than 200 feet (60 m)
±3%, ±5 feet (±2 m) for cables longer than 200 feet (60 m)
Distance to Bridge
0 feet to 3,200 feet (975 meters)
Tap
20
Caution
or any similar
®
Table 4. Accessories
Description
Accessories
Table 4 shows the accessories available for the TS100
PRO tester. For the latest list of accessories, visit the
Fluke Networks website.
LEAD-ABNP-100
LEAD-ALIG-100
LEAD-ABN-100
CASE-TS-100
Fluke Networks
Model Number
if the cable is
Err
Hide quick links:
Advertisement
Table of Contents
