Quick Start Guide; How To Play Music - SACKit Rock 350 User Manual

QUICK START GUIDE

When you first get your SACKit Rock 350 earphones you need to charge them before they are ready for
use.
Start by placing your SACKit Rock 350 earbuds in the charging case. This is how the earbuds charge.
Now charge the charging case by either of 2 options.
1: Place the charging case on a Qi wireless charger, like SACKit´s own CHARGEit.
2: Use the attached USB-C cable and any 5V, 1A power supply.
Charge for 2 hours minimum.
Place SACKit Rock 350
earbuds in the charging case.
Please turn off your earbuds after use to get a longer battery life. The earbuds turn off automati-
cally when placed in the charging case.

HOW TO PLAY MUSIC:

1. For first use: remove SACKit Rock 350 earbuds from the case. Both earbuds will flash on the top edge
LED
2. Switch on Bluetooth on your device
3. Choose "SACKit Rock 350" under Bluetooth settings on your device. Your earbuds are now connected
with your device.
4. Start playing music on your device
5. SACKit Rock 350 automatically switches on/off when connected/disconnected to the charging case.
Manually power on/off by holding down the earbud buttons for 5 seconds
6. SACKit Rock 350 will automatically pair with the last connected device
7. To connect to a new device tap the earbud button 6 times. This works on either earbud
To connect to a new device make sure that the previous connected device is disconnected otherwise con-
necting opportunity won't appear on the new device.
The charging case can charge
on a wireless charger.
The charging case can also be
charged with a USB-C cable.
4