Quick Start Guide - SACKit ROCKit S User Manual

QUICK START GUIDE

When you first get your ROCKit S earphones you need to charge them before they are ready for
use .
Start by placing your ROCKit S earbuds in the charging case . This is how the earbuds charge .
You can charge your case by using the attached USB-C cable and any 5V, 1A power supply .
Charge for 2 hours minimum .
The earbuds charge in the
Please turn off your earbuds after use to get a longer battery life. The earbuds turn off automati-
cally when placed in the charging case .
How to play music:
1 . For first use: remove ROCKit S earbuds from the case. Both earbuds will flash white on the top
edge LED
2 . The left earbud will blink white, indicating ROCKit S is in pairing mode and the earbuds are con-
nected via True Wireless Stereo
3 . Switch on Bluetooth on your device
4 . Choose "ROCKit S" under Bluetooth settings on your device. Your earbuds are now connected
with your device
5 . Start playing music on your device
6 . ROCKit S automatically switches on/off when connected/disconnected to the charging case. Ma-
nually power on/off by holding down the earbud buttons for 10 seconds
7 . ROCKit S will automatically pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won't appear on the new device.
charging case .
The charging case is charged
with a USB-C cable .
4