Use Sackit Rock 350 Earbuds; How To Pair Sackit Rock 350 Earbuds With Bluetooth Devices; Operation Instructions For Use After First Pairing - SACKit Rock 350 User Manual

USE SACKIT ROCK 350 EARBUDS

1. For first use: Remove SACKit Rock 350 earbuds from the case. Both earbuds will blink white on the
top edge LED
2. The left earbud will blink red/white, indicating SACKit Rock 350 is in pairing mode and the earbuds
are connected via True Wireless Stereo .
3. Switch on Bluetooth on your device
4. Choose "SACKit Rock 350" under Bluetooth settings on your device. Your earbuds are now connec-
ted with your device
5. Start playing music on your device
6. SACKit Rock 350 automatically switches on/off when connected/disconnected to the charging case.
Manually power on/off by holding down the earbud buttons for 5 seconds.
7. SACKit Rock 350 will automatically pair with the last connected device.
8. To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won't appear on the new device.

HOW TO PAIR SACKIT ROCK 350 EARBUDS WITH BLUETOOTH DEVICES

1. Simply remove your SACKit Rock 350 earbuds from the charging case or long press the X button on
your earbuds for 10 seconds. After the first 5 seconds, you will hear the ON sound. Keep pressing the
button for another 5 seconds to turn on pairing mode, indicated by flashing red and white LED lights.
2. Please keep the earbuds and Bluetooth device in range of 1 meter when pairing and make sure SACKit
Rock 350 is turned on.
3. Go into the Bluetooth settings on your device and search for new Bluetooth devices and select
"SACKit Rock 350".
4. The LED light will blink white once SACKit Rock 350 is successfully paired.
5. Long press X button on the earbuds to turn off your SACKit Rock 350 earbuds.
6. SACKit Rock 350 can remember 8 devices: You can pair 8 units with your SACKit Rock 350, at 9th
unit SACKit Rock 350 will forget the first connected.

OPERATION INSTRUCTIONS FOR USE AFTER FIRST PAIRING

1. After first time pairing your SACKit Rock 350 earbuds and Bluetooth device will automatically recon-
nect.
2. Turn the earbuds on by holding down the X button until you hear the ON sound or by removing the
earbuds from the case
3. Long press X button to turn off
6