Quick Start Guide - SACKit Rock 250 User Manual

QUICK START GUIDE

When you first get your SACKit Rock 250 earphones you need to charge them before they are
ready for use .
Start by placing your SACKit Rock 250 earbuds in the charging case . This is how the earbuds charge .
Now charge the charging case by either of 2 options .
1: Place the charging case on a Qi wireless charger, like SACKit´s own CHARGEit .
2: Use the attached USB-C cable and any 5V, 1A power supply .
Charge for 2 hours minimum .
The earbuds charge in the
charging case .
Please turn off your earbuds after use to get a longer battery life. The earbuds turn off automati-
cally when placed in the charging case .
How to play music:
1 . For first use: remove SACKit Rock 250 earbuds from the case. Both earbuds will flash white on
the top edge LED
2 . The left earbud will blink red/white, indicating SACKit Rock 250 is in pairing mode and the ear-
buds are connected via True Wireless Stereo
3 . Switch on Bluetooth on your device
4 . Choose "SACKit Rock 250" under Bluetooth settings on your device. Your earbuds are now con-
nected with your device
5 . Start playing music on your device
6 . SACKit Rock 250 automatically switches on/off when connected/disconnected to the charging
case. Manually power on/off by holding down the earbud buttons for 10 seconds
7 . SACKit Rock 250 will automatically pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won't appear on the new device.
The charging case can charge
on a wireless charger .
The charging case can also be
charged with a USB-C cable .
4