Sealing Ring; Using Favourite Programmes; Care, Cleaning And Storage - Instant Pot PRO 60 User Manual

Using Favourite Programmes

Set and save 5 custom programmes as Favourites for one-touch access to recipes.
Saving recipes as Favourites
01 Select any Smart Programme and set it up according to your recipe.
02 When you're happy with the settings, touch and hold any Fav key for 3 seconds to
save the programme.
That's it! Your customised programme is ready to use any time you want.
You can replace a saved Favourite with a new recipe by repeating these steps.
Using Favourite recipes
Depending on your recipe, you can add your ingredients to the inner pot before or after
Pre-heating.
01 Touch the Fav key you want to use.
02 Touch Start to begin.
The display shows On and the progress bar shows Pre-heating.
It's really that easy!
If you press a Fav key that hasn't been saved as a Favourite, the display flashes [tbd]
3 times and returns to the previous screen.
48 | support@instantpot.co.uk | +44 (0) 3331 230051

Care, cleaning and storage

Clean your Instant Pot Pro and its parts after each use. Failure to follow these cleaning
instructions may result in catastrophic failure, which may lead to property damage or
severe personal injury.
Always unplug your multicooker and allow it to cool to room temperature before
cleaning. Never use metal scouring pads, abrasive powders or harsh chemical detergents
on any of the Instant Pot's parts or accessories.
Allow all surfaces to dry thoroughly before use and before storage.
Parts
Accessories
Dishwasher safe if placed on the top rack.
• Steam rack
Dishwasher safe if placed on the top rack.
Remove all the parts from the lid before cleaning. See Care, cleaning and storage:
Removing and installing parts.
Lid and parts
• With the steam release valve and anti-block shield removed, clean the interior of
the steam release pipe with a pipe cleaner to prevent clogging.
• Steam release valve
• To drain water from the lid after dishwashing, take the lid handle and hold the
• Steam release cover
lid vertically over a sink, then turn it 360°— like turning a steering wheel.
• Anti-block shield
• After cleaning and draining, store the lid upside down on the multicooker base

• Sealing ring

to allow it to air dry completely.
• Float valve
• Store sealing rings in a well-ventilated area to decrease residual odour from
• Silicone cap
highly flavoured meals. To eliminate odours, add 1 cup (250 mL) of water and
• QuickCool cover
250 mL (1 cup) of white vinegar to the inner pot, then run Pressure Cook for
• Condensation collector
5 to 10 minutes and QR pressure.
• Check the condensation collector after each use and empty and clean it as
needed. Do not allow food or moisture to sit in the condensation collector,
as harmful bacteria may result.
Dishwasher safe.
• Acute hard water staining (rainbow, bluish or white discolouration) may require
scrubbing with a sponge dampened with vinegar or a non-abrasive cleanser like
Bar Keeper's Friend.
Inner pot
• For tough or burned-on food residue, add boiling water and washing up liquid
to the inner pot and leave to stand for a few hours for easy cleaning.
• Make sure all exterior surfaces are dry before placing the inner pot in the
multicooker base.
Wipe only.
Power lead • Use a barely-damp cloth to remove particles from the lead.
• Wrap it around the multicooker base and tuck the end into the lead holder.
Wipe only.
• Wipe the inside of the outer pot as well as the condensation rim with a barely-
Multicooker base
damp cloth. Allow them to dry completely before inserting the inner pot.
• Clean the multicooker base and control panel with a soft, barely-damp cloth
or sponge.
Some discolouration may occur after machine washing, but this will not affect the multicooker's safety or performance.
Cleaning methods and instructions
instantpot.co.uk | 49