Care And Maintenance; Cleaning The Mag613; Calibration; Storage - Bartington Mag613 Operation Manual

Eight-channel three-axis magnetometer array

Table of Contents

8. Care and Maintenance

No user repair or servicing is possible beyond the steps listed below and in

Troubleshooting.

Note: The Mag613 contains no user serviceable parts. Attempts to dismantle, modify or

repair the magnetometer will invalidate the Warranty.

Caution: Avoid using chemicals, such as solvents, when cleaning the Mag613. Use a cloth

wetted with soap and water to remove grime from enclosures.

Periodic calibration of the Mag613 is not required. If a fault is suspected, the sensor should be

returned to Bartington Instruments for inspection and repair or replacement.

Caution: Do not store the Mag613 in temperatures outside the range specified in

DS1854.

Caution: Avoid storing the Mag613 in areas with magnetic fields above the range of the

magnetometer (refer to

Caution: Avoid storing the Mag613 with abrasives, corrosive chemicals or solvents.

The Mag613 system is a precision electronic instrument and should be treated as such.

Note: Bartington Instruments supplies its products in appropriate packaging for

transporting. This packaging should be used for any future transport.

Note: Avoid bending cables through angles greater than the minimum bend radius as

specified in

brochure

Note: Avoid excessive exposure to high temperatures, vibration or shocks.

BARTINGTON INSTRUMENTS

brochure

DS1854).

DS1854.

Page 10 of 13

Section 7:

brochure

OM2442 iss 2

Table of Contents