Taking Measurements; Troubleshooting; Care And Maintenance; Storage & Transport - Bartington MS3 Operation Manual

10. Taking Measurements

Instructions for using the Bartsoft, Bartsoft Mobile and GeoLabsoft application software are
available at www.bartington.com/om-software.
Instructions are also supplied on the disk included as part of the system.

11. Troubleshooting

In the event of any apparent malfunction, email
Bartington Instruments service team on +44 (0)1993 706565.
Caution: Fault finding by customers may invalidate the warranty.
The meter is not user serviceable.
The most likely causes of failure, and their solutions, are detailed in

12. Care and Maintenance

Surface dirt contamination on the MS3 meter should be removed using a mild detergent solution
only.
13. Storage & Transport
The meter is supplied in a cushioned case which is ideal for storage and transporting the device.

14. End of Life Disposal

This product (electrical and electronic equipment) should not be placed in municipal waste.
Check local regulations for disposal of electronic products.
BARTINGTON INSTRUMENTS
service bartington.com, or telephone the
@
Page 13 of 15
MS3 Meter Visual Check.
OM3227/2