6. Using the Mag613
6.1. Magnetic Hysteresis
Note: Do not subject your magnetometer to magnetic fields greater than their stated
measuring range for extended periods as this could alter the DC offset. If this occurs, the
offset will exhibit drift as it returns to its original offset specification.
Caution: Subjecting the magnetometer to fields in excess of 2 x the nominal range may
cause inaccuracy in future measurements.
6.2. Environmental Precautions
Refer to
brochure DS1854
Caution: Exceeding the maximum environmental ratings may cause irreparable damage to
your sensor.
BARTINGTON INSTRUMENTS
for maximum environmental electrical and mechanical ratings.
Page 8 of 13
OM2442 iss 2