Appendix C: Pc App Installation - Maritime Geothermal Nordic PC Series Installation And Service Manual

Appendix C - PC App Installation
The PC App allows detailed interfacing with the control board
using a Windows laptop computer. Any Windows from XP and
onwards should be compatible, but Windows 10 (as found on
any recent laptop computer) is recommended. First, install the
USB driver as per the previous appendix.
The easiest way to install the Pc App is from the USB drive in-
cluded with the unit. Insert the USB stick into a Windows
computer, and open a File Explorer window to view its contents:
Double click on the SOFTWARE folder to show its contents:
Double click on Step 2 and follow the prompts, clicking "allow"
or "yes" as required. If you get a warning that .NET framework
is required, go back and double click on step z, then try Step 2
again.
If the USB stick drive is not available, the same file can be
downloaded from the web page.
1. Go to www.nordicghp.com, Download Software page:
2. Click on MGL GEN2 PC APP V2__ to download it:
3. Choose "Open with
Windows Explorer",
and hit "OK":
ISSUE 03: 1-Oct-2021
4. In the window that is displayed, click and hold down the
mouse button on the folder name, and drag to your desktop:
5. Double click on the folder you just dragged onto the desktop,
then double click on the "setup" file:
6. Click "Yes", "Run", "Install", or similar on any warning win-
dows which pop up. If an error message is encountered
regarding .NET framework, exit the installation and use the
link on the Download Software page to install the missing
item:
Then go back to step 5.
7. The PC App will open when it is finished installing. You are
now ready to connect a USB cord between the laptop com-
puter and GEN2 control board, and connect.
Page 89 002291MAN-03