Table 25 - Bacnet Objects - Fault Descriptions (Read Only) - Maritime Geothermal Nordic PC Series Installation And Service Manual

TABLE 25 - BACnet OBJECTS - FAULT Descriptions (Read Only)

Name Data Type
AI4 Analog Input
AI5 (Hot Tank) Analog Input
LPS1 Analog Input
HPS1 Analog Input
LPS2 Analog Input
HPS2 Analog Input
Suction Line1 Analog Input
Suction Line2 Analog Input
Outside Ambient Analog Input
O_IN Analog Input
O_OUT Analog Input
I_IN Analog Input
I_OUT Analog Input
Name ID
Board Faults AV8
Sensor Faults AV9
Note: Board and Sensor Fault objects are type Analog Value but values are bit coded and may be decoded as such (integer value).
Note * : Value is for a single fault and reference only.
Note: Objects may be subject to change without prior notice.
ISSUE 03: 1-Oct-2021
ID
AI0 N/A
AI1 External pool water temperature sensor faulty or disconnected - requires accessory
AI6 Low pressure sensor faulty or disconnected
AI7 High pressure sensor faulty or disconnected
AI13 N/A
AI14 N/A
AI10 Suction line 1 temperature sensor faulty or disconnected.
AI17 N/A
AI20 N/A
AI21 N/A
AI22 N/A
AI23 N/A
AI24 Internal pool water temperature sensor faulty or disconnected.
DECIMAL
BIT #
VALUE*
- - Bit description is given below.
0 1 Digital inputs
1 2 Digital outputs
2 4 PWM outputs
3 8 Analog to digital conversion
4 16 Real time clock
5 32 EEPROM memory
6 64 Menu buttons
7 128 LCD Display
- - Indicates sensor failures. Bit description is given below.
0 1 Suction line 1 temperature
1 2 N/A
2 4 Outdoor Ambient temperature - requires accessory
3 8 Calibration temperature
4 16 N/A
5 32 Internal pool water temperature sensor
6 64 N/A
7 128 N/A
8 256 N/A
9 512 N/A
Page 43
Description
Description
002291MAN-03