Appendix B: Usb Driver Installation - Maritime Geothermal Nordic PC Series Installation And Service Manual

Appendix B - USB Driver Installation
The first step in connecting a Windows laptop computer to the
control board is to install the USB driver. Any version of Win-
dows from XP and onwards should be compatible, but Windows
10 (as found on any recent laptop computer) is recommended.
The easiest way to install the USB driver is from the USB drive
included with the unit. Insert the USB stick into a Windows
computer, and open a File Explorer window to view its contents:
Double click on the SOFTWARE folder to show its contents:
Double click on Step 1 to install the USB driver, clicking "allow"
or "yes" as required.
If the USB stick drive is not available, the same file can be
downloaded from the web page.
1. Go to www.nordicghp.com, Download Software page:
2. Click on MGL GEN2 USB Driver Installer to download it:
3. Choose "Open with
Windows Explorer",
and hit "OK":
ISSUE 03: 1-Oct-2021
4. In the window that is displayed, click and hold down the
mouse button on the folder name, and drag to your desktop:
5. Double click on the folder you just dragged onto the desktop,
then double click on the "USBDriverInstaller" file:
6. In the next window, click on "Install Drivers":
7. You will see a message indicating the driver was installed
successfully.
8. You are now ready to install the PC App.
Page 88 002291MAN-03