Operation - Crestron IM-FTCC-B Operations & Installation Manual

Crestron IM-FTCC-B

Operation

Operations & Installation Guide – DOC. 6349A
Up to three iMedia transmitters can be installed in an iMedia system. Pressing
the SELECT button on any iMedia transmitter makes that input active,
overriding the previously selected input. The SELECT button also may be used
to power on the projector. Holding the SELECT button for five seconds powers
down the system. Indicator light stays on for selected computer center. Blinking
light indicates control is changing from one computer center to another.
The rotary VOLUME control turns clockwise to increase volume and
counterclockwise to decrease it.
Cables may be stored neatly beneath the lid when not in use to keep out debris
and dust. The lid includes a pass-through slot, allowing operation with lid
closed. The lid opens 180 degrees, allowing operation with full access to
controls inside.
iMedia FlipTop Computer Center: IM-FTCC-B • 19
iMedia FlipTop Computer Center