Crestron IM-FTCC-B Operations & Installation Manual page 20

iMedia FlipTop Computer Center
16 • iMedia FlipTop Computer Center: IM-FTCC-B
Mounting Bracket Screw Locations
#6-32 Screws
Surface
Cutout
3. Install the four #10-32 screws in the mounting brackets (two screws per
bracket). Refer to the following diagram.
4. Slide the mounting brackets over the #6-32 screws and tighten the
#6-32 screws.
Mounting Bracket Installation
5. Turn the four #10 screws equally until they contact the underside of the
mounting surface.
NOTE: Do not over-tighten the #10 screws as this may damage the surface
and/or the unit.
Crestron IM-FTCC-B
Operations & Installation Guide - DOC. 6349A
#6-32 Screws