Setup; Network Wiring; Installation - Crestron IM-TCC Operations & Installation Manual

Crestron IM-TCC

Setup

Bracket Dimensions
Operations & Installation Guide – DOC. 6383
iMedia Table Mount Computer Center

Network Wiring

CAUTION: In order to ensure optimum performance over the full range of
your installation topology, Crestron Certified Wire, and only Crestron Certified
Wire, should be used. Failure to do so, may incur additional charges if support is
required to identify performance deficiencies as a result of using improper wire.
CAUTION: Use only Crestron power supplies for Crestron equipment. Failure
to do so could cause equipment damage or void the Crestron warranty

Installation

The IM-TCC is designed to mount to the underside of a horizontal surface, such
as a desktop, lectern, or podium, in a cutout area.
Tools Required
Phillips screwdriver
•
Small flat-blade screwdriver (for connecting the VGA cable)
•
NOTE: The IM-TCC mounting brackets can accommodate virtually any
thickness.
Mounting Parts Supplied with the IM-TCC
PART DESCRIPTION
Screw #8-32 x 1 in, Pan Head, Phillips
Mounting Bracket, Right (2012702)
Mounting Bracket, Left (2012704)
iMedia Table Mount Computer Center: IM-TCC • 7
QUANTITY
4
1
1