Table of Contents
Advertisement
Crestron IM-TCC
iMedia Table Mount Computer
Center: IM-TCC
Introduction
Operations & Installation Guide – DOC. 6383
iMedia Table Mount Computer Center
Features and Functions
The IM-TCC is part of the Crestron
control systems and signal routing solutions. The line of IM devices currently
includes two receivers, IM-RX1 and IM-RX3, and three transmitters, IM-WCC,
IM-TCC, and IM-FTCC-B.
The iMedia Table Mount Computer Center supports a single computer video
and audio connection mounted to the underside of a table. Mounting brackets
are included.
This device uses iMedia (IM) technology utilizing a single CresCAT-IM cable
to transmit computer RGB and stereo audio signals to a single projector or
plasma display. A typical XGA signal (1024 X 768 pixels at 60 Hz) can be
transmitted up to 84 feet using iMedia, while higher resolutions up to
1600 x 1200 can be handled over shorter distances. Audio is transmitted
digitally at 20-bit, 48 kHz resolution. To facilitate connection of audio, video,
and computer equipment, all media, power and control signals are routed via a
single CresCAT-IM cable for an uncomplicated installation.
NOTE: The IM-TCC is not a Cresnet
Functional Summary
•
One computer RGB input connector
•
One computer audio input connector
•
One iMedia RJ-45 output connector (on the rear side)
•
Power on/off SELECT button and indicator
•
Rotary local volume control
The iMedia System
Using a new, proprietary signal routing solution, RGBHV, audio, power and
control signals are all transported using a single cable solution called iMedia.
iMedia Table Mount Computer Center: IM-TCC • 1
®
iMedia line of network devices, room
®
device.
Advertisement
Table of Contents
