Setting A Control System Password Via Ethernet - Crestron CNXENET+ Operations & Installation Manual

Crestron CNXENET+
Operations & Installation Guide – DOC. 8153A
CNX Enhanced Ethernet Expansion Card
Password Dialog Boxes
4. Perform any of the diagnostics and features that the Viewport provides.

Setting a Control System Password via Ethernet

After establishing communication with a control system via Ethernet, the Crestron
Viewport may be used to set (or change) a password to limit access to the control
system. To set a password via Ethernet, perform the following procedure.
1. In the Viewport, select Functions | Set Control System Password for
TCP/IP as shown below.
Viewport Set Control System Password Function
CNX Enhanced Ethernet Expansion Card: CNXENET+ • 17