Zone Control Interface - Fujitsu UTY-CDPXZC Design & Technical Manual

6-2. Zone control interface

¢ Installation space
Leave space at the bottom of zone control interface so that the cables can be routed from the
underside of the unit.
For service space, refer to the installation manual of each indoor unit.
ART 30/36
Indoor unit
ART 45/54/60
[Attic]
Indoor uni t
¢ Installation procedure
 Installation to indoor unit
1. Remove the cover of zone control interface.
2. Attach the zone control interface to the indoor unit.
Control box
Zone control interface
500 or mor e
(Service space)
35 or mor e
Zone control interface
Unit : mm
- 44 -
ART 72/90
[Attic]
Control box
Indoor uni t
Zone control interface
Screws
450 or mor e
(Service space)
35 or more
Unit : mm