Setting A Paper Size And Type - Canon FAX-L170 Starter Manual

1 2
Preface Installing the Machine and Specifying Initial Settings
6.
Change the line type.
By default, the telephone line type on the machine is set to tone dialing. If you use tone dialing, skip the following procedure.
If you use pulse dialing, follow the procedure below and change the telephone line type setting on the machine to pulse
dialing.
If you do not know the type of telephone line you use, contact your local telephone company.
Press [ ] (Menu).
Press [ ] or [ ] to highlight <Fax Settings>, and then press [OK].
Press [ ] or [ ] to highlight <Basic Settings>, and then press [OK].
Press [ ] or [ ] to highlight <Select Line Type>, and then press [OK].
Press [ ] or [ ] to highlight the line that you are using, and then press [OK].
<Pulse>: Pulse dialing
<Tone>: Tone dialing (Default)
Press [ ] (Menu) to close the Menu screen.

Setting a Paper Size and Type

Press [ ] (Paper Settings).
Press [ ] or [ ] to highlight
<Paper Type>, and then press [OK].
Paper Type
Plain (60-90 g/m
Plain L (60-90 g/m
Heavy 1 (90-163 g/
Heavy 2 (105-163 g/
* <Select Line Type> may be unavailable depending on the country where you are using the machine.
Press [ ] or [
<Drawer 1>, and then press [OK].
Paper Settings
Drawer 1
1
Press [ ] (Paper Settings) to
close the Paper Settings screen.
2
)
2 )
...
...
3
Installing the Drivers
] to highlight Press [
<Paper Size>, and then press [OK].
Appendix
] or [ ] to highlight
Paper Size
A4
A5
B5
LTR
15