Table of Contents
Advertisement
CRESTRON CNSNET
DESCRIPTION:
Functional Description
CNSNET
The CNSNET, illustrated in figure 1, is an RS-232 interface, designed to operate with the CRESNET II
remote control system (herein referred to as the CRESNET II system). This unit in conjunction with
VisionPC/Control
1.4 in
3.7 cm
VisionPC/Control Software
VisionPC/Control software turns a project created in VisionPC/Create
software provides full control and communications to a CRESTRON control system via your PC and a
CNSNET.
Physical Description
CNSNET electronic hardware is housed in a black cold-rolled painted steel box (refer to figures 1 or 2).
Silk screening is applied to the face of one panel of the steel case. Located on this panel is a four-pin
network port (24 Y Z G), a RJ-11 port (RS-232), a red LED (ID SEL), and a green LED (NET PWR).
There are four rubber bumpers on the base of the unit for stability and to prevent slippage.
R E M O T E
C O N T R O L
S Y S T E M S
SM
software permits a PC to functionally operate as a touchpanel.
R S 232
2 4 Y Z G
CRESTRON
Figure 1. CNSNET, RS-232 Interface
3.6 in
9.2 cm
CNSNET
SM
1
PC Interface
7.1 in
17.9 cm
into a run-time executable. This
DOC. 8085
Advertisement
Table of Contents
