Related Manuals for Major Manufacturing HIT-66-200
Summary of Contents for Major Manufacturing HIT-66-200
- Page 1 1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS HIT-66-200 LOCK MORTISER WHEN USING POWER TOOLS ALWAYS WEAR EYE AND EAR PROTECTION!! Copyright 2012—Major Manufacturing Inc...
-
Page 2: Think Safety
Be sure all bits and cutters are sharp and in good condition and all power tools and extension cords are in good working order and properly grounded. AND MOST IMPORTANTLY, BE SURE TO WEAR, EYE AND EAR PROTECTION. Copyright 2012—Major Manufacturing Inc PAGE 2... - Page 3 Leave all screws loose at this time. NOTE: The HIT-66 clamps shown are not part of the HIT-66-200 mortiser set and must be purchased as a separate item. Once all screws have been installed they can be tightened.
- Page 4 With both clamps opened equally, install both inside and outside templates to the HIT-66 clamp as shown. Do not tighten the 10-32 screws at this time. When all screws have been loosely installed, then it is ok to tighten. The next part to attach to the template is the alignment guide.
- Page 5 Use a moderate drill speed 350 to 500 rpm. Drill a second hole above the first and continue up the door. PAGE 5 Copyright 2012—Major Manufacturing Inc...
- Page 6 HIT-66 Series will work with the mortiser. Follow the direc- tions for the template used. Here the spindle hole is being drilled to the mortise pocket. Thru bolt holes being drilled on both sides of the door. PAGE 6 Copyright 2012—Major Manufacturing Inc...
- Page 7 Thumb turn hole being drilled on the right. This hole is drilled on the inside of the door to the pocket. When all holes have been drilled, remove the template from the door. Completed install shown at right. PAGE 7 Copyright 2012—Major Manufacturing Inc...
- Page 8 That’s all there is to it! Visit our web site at www.majormfg.com to see our complete line of tools and accessories. While there, sign up for our new product releases and we will email them direct to you. Copyright 2012—Major Manufacturing Inc PAGE 8...