Advertisement
Quick Links
1825 VIA BURTON
ANAHEIM CA 92806
714-772-5202 / FAX 714-772-2302
EMAIL: MAIL@MAJORMFG.COM
WEB: WWW.MAJORMFG.COM
INSTRUCTIONS
FOR
HIT-40AR7
RETRO FIT DRILL GUIDE
FOR AR 4550
DEAD BOLT LEVER
WHEN USING POWER TOOLS
ALWAYS WEAR
EYE AND EAR PROTECTION!!
Copyright 2007—Major Manufacturing
Advertisement
Related Manuals for Major Manufacturing HIT-40AR7
Summary of Contents for Major Manufacturing HIT-40AR7
- Page 1 1825 VIA BURTON ANAHEIM CA 92806 714-772-5202 / FAX 714-772-2302 EMAIL: MAIL@MAJORMFG.COM WEB: WWW.MAJORMFG.COM INSTRUCTIONS HIT-40AR7 RETRO FIT DRILL GUIDE FOR AR 4550 DEAD BOLT LEVER WHEN USING POWER TOOLS ALWAYS WEAR EYE AND EAR PROTECTION!! Copyright 2007—Major Manufacturing...
- Page 2 BE DRILLED 5/32” AND TAPPED 10-32 ALIGNMENT ARROW—THIS MUST POINT TO STRIKE SIDE OF DOOR. HOLE FOR USE WITH HIT-22 ALIGNMENT TOOL. DRILL BUSHINGS FOR LOCK INDICATOR. DRILL 5/32” AND ENLARGE TO 7/8” WITH A HOLE SAW. Copyright 2007—Major Manufacturing PAGE 2...
- Page 3 STANDARD T-TURN CYLINDER TO BE REPLACED WITH A 4550 DEAD BOLT LEVER. REMOVE FACEPLATE AND T-TURN CYLINDER. HIT-22 ALIGNMENT GUIDE ABOUT TO BE INSTALLED IN CYLINDER OPENING. TIGHTEN CYLINDER SET SCREW AND REMOVE INSTALLATION HANDLE. Copyright 2007—Major Manufacturing PAGE 3...
- Page 4 TO THE STRIKE SIDE OF THE DOOR. THIS MAY MEAN THE GUIDE MAY HAVE TO BE TURNED OVER AND THE ARROW AND WORD STRIKE FACES THE DOOR STYLE. SQUARE DRILL GUIDE TO DOOR USING A COMBINATION SQUARE. Copyright 2007—Major Manufacturing PAGE 4...
- Page 5 TWO INDICATOR HOLES TO 7/8” WITH A HOLE SAW. ALTERNATE DRILLING BETWEEN BOTH PILOT HOLES A LITTLE AT A TIME. DRILLING ONE HOLE THROUGH AT ONCE WILL REMOVE THE SECOND PILOT HOLE. ALL HOLES DRILLED INCLUDING INDICATOR OPENING. Copyright 2007—Major Manufacturing PAGE 5...
- Page 6 TAP THE FOUR CORNER HOLES TO 10-32 WITH A HAND TAP. INSTALL ADAMS RITE DEAD LOCK LEVER PER MANUFACTURERS INSTRUCTIONS. COMPLETED INSTALLATION, CHECK FOR PROPER OPERATION. THAT’S ALL THERE IS TO IT! Copyright 2007—Major Manufacturing PAGE 6...