Table of Contents
Advertisement
Operating instructions RS wash │ D wash │ P wash │ SHERAprint wash │ 3Dewash
Special safety instructions
Tips and recommendations
1.2
Intended use
1.2.1 Digital Workflow
1
2
Creation of
Processing
3D data
the 3D data
Rapid Shape GmbH │ DOCR000257
In order to draw attention to particular dangers, the following symbols
are used in safety notices:
Warning: dangerous electrical voltage
Warning: hand injuries
This symbol highlights useful tips and recommendations,
as well as information for efficient and trouble-free
operation.
The cleaning unit is intended for cleaning components manufactured in
the DLP process with isopropanol. The digital workflow is to be
observed. (→ Chapter 1.2.1)
The printer system is designed for temperature controlled interiors.
(→ Chapter 10)
Proper use requires compliance with all information in this manual.
Any use going beyond the intended use or otherwise is deemed to be
improper. The operator is exclusively liable for any resulting damage.
Use contrary to the intended use includes, but is not limited to the
following actions:
— Operation within potentially explosive areas
— Operation with explosion-hazardous printing materials
— Outdoor operation
— Operation in tropical climates
— Operation in wet, damp rooms
— Operation without sufficient instruction
— Operation with defective or modified safety devices
— Operation without mandatory safety equipment
— Operation with unauthorised spare parts
— Improper conversions, modifications, repairs and maintenance
3
4
Preparation
Printing the
of 3D data
3D
for the printer
components
system
The cleaning unit described in these operating instructions is part of the
digital workflow and is used in step 5.
5
6
Post-
Use of the
processing
component
6 │ 29
Advertisement
Table of Contents
