Table of Contents
Advertisement
9.1
Safety instructions for disassembly & disposal
Electrical accessories
Improper disassembly
9.2
Disassemble the machine
9.3
Dispose of the machine
27 │ 29
Operating instructions RS wash │ D wash │ P wash │ SHERAprint wash │ 3Dewash
D A N GER!
Danger to life due to electric current!
There is an imminent danger of electrocution
in the event of contact with live parts.
— Before starting disassembly work, the power
supply must be finally disconnected.
W A RN IN G!
Risk of injury due to improper disassembly!
Stored residual energy, sharp, pointed components and
tools can cause injuries.
— Disassembly work may only be carried out by
qualified personnel.
— Sufficient space must be ensured before the
disassembly work begins.
— Wear appropriate protective clothing.
— Disassemble components properly.
— Handle edged and pointed components carefully.
— If necessary, secure components so that they can
not fall down during work.
— In case of doubt, please contact the Customer
service.
To disassemble the machine, please proceed as follows:
1. Switch off the machine. → Chapter 7.1
2. Disconnect the power supply.
3. Separate the cleaning liquid container from the machine.
4. Open the drawer and, if present, remove any remaining
components or building platforms from the inner container.
5. If present, remove any soiling.
6. Disassemble the machine properly.
Dispose of the machine as intended via your recycling agent or
approved specialist companies. For a list of materials used, please
contact Rapid Shape.
Rapid Shape GmbH │ DOCR000257
Advertisement
Table of Contents
