Table of Contents
Advertisement
Operating instructions RS wash │ D wash │ P wash │ SHERAprint wash │ 3Dewash
8.1
Safety during cleaning and maintenance
8.2
Overview of the cleaning & maintenance work
8.2.1 Change cleaning bottles
Rapid Shape GmbH │ DOCR000257
C A U T ION !
Risk of injury due to moving parts!
The machine consists in part of accessible parts that can
easily cause hand injuries through crushing or getting
caught.
— When closing the drawer, do not insert any fingers
into the closing area of the drawer.
— During operation, never reach into the area of the
rotors.
N O TE!
Material damage due to incorrect cleaning and
maintenance!
Observe the individual cleaning and maintenance steps
to avoid material damage to the machine.
Interval
What
Depending on use,
Change cleaning
autom. display
bottles
1 /month
Check inner container → Chapter 8.2.2
Every 3 months
Check tubes
Every 6 months
Change carbon filter
The cleaning and maintenance of the machine is an
integral part of a properly functioning machine. It is
therefore essential to observe the prescribed cleaning
and maintenance work.
Required accessories:
Personnel:
To change the cleaning bottles, please proceed as follows:
1. Put on protective gloves.
2. Call up the bottle change wizard on the user interface.
Start the wizard.
How
→ Chapter 8.2.1
→ Chapter 8.2.3
→ Chapter 8.2.4
1 new bottle of cleaning liquid, protective
gloves
Operator
24 │ 29
Advertisement
Table of Contents
