Table of Contents
Advertisement
6.1
Safety during operation
6.2
Switching on the machine
6.3
Equipping the machine
19 │ 29
Operating instructions RS wash │ D wash │ P wash │ SHERAprint wash │ 3Dewash
C A U T ION !
Risk of injury due to moving parts!
The machine consists in part of accessible parts that can
easily cause hand injuries through crushing or getting
caught.
— When closing the drawer, do not insert any fingers
into the closing area of the drawer.
— During operation, never reach into the area of the
rotors.
N O TE !
Wearing protective gloves protects the skin from contact
with skin damaging materials. It is therefore essential to
observe the information provided by the material
manufacturer.
To switch on the machine, please proceed as follows:
1. Prerequisite: The machine has already been fully connected.
→ Chapter 4.3
2. Turn the machine on using the power in/off button.
— The machine is started and performs a self-test during
start up.
— After completion of the self-test, the user interface Home
screen is displayed.
For equipping the machine please proceed as follows:
1. Grasp the drawer extensions on the left and right of the machine
and open the drawer.
2. Place your components in the inner container.
Observe the instructions for equipping, see below!
3. Close the drawer.
Be careful of your fingers.
4. Select the operating mode. → Chapter 6.4
The components must never touch the rotors as they
may otherwise be damaged.
Rapid Shape GmbH │ DOCR000257
Advertisement
Table of Contents
