Check Hose Connections; Change The Activated Carbon Filter - Rapid Shape RS wash Operating Instructions Manual

Hide thumbs Also See for RS wash:
Table of Contents

Advertisement

Operating instructions RS wash │ D wash │ P wash │ SHERAprint wash │ 3Dewash

8.2.3 Check hose connections

8.2.4 Change the activated carbon filter

Rapid Shape GmbH │ DOCR000257
N O TE !
Wearing protective gloves protects the skin from contact
with skin damaging materials. It is therefore essential to
observe the information provided by the material
manufacturer.
For proper function of the cleaning unit and compliance
with biocompatibility requirements, the inner container
must always be kept clean.
Required accessories:
Personnel:
To check the hose connections, please proceed as follows:
1. Open the drawer.
2. Using an Allen key, loosen the fastening screws on the left and
right between the drawer and the housing.
3. Then remove the screws and set aside for later reassembly.
4. Grasp the lid and fold it completely backwards.
5. Check the hoses for visible damage or signs of wear. Damaged
hose connections must be replaced. Separate installation
instructions are enclosed with the spare parts.
6. Close the lid and fasten it firmly to the housing with the fastening
screws.
7. Close the drawer.
8. Check the hoses in the cleaning liquid container for visible
damage or signs of wear.
(For opening the container, see chapter 8.2.1) Damaged hose
connections must be replaced. Separate installation instructions
are enclosed with the spare parts.
Required accessories:
Personnel:
To change the activated carbon filter, please proceed as follows:
1. Open the drawer.
2. Using an Allen key, loosen the fastening screws on the left and
right between the drawer and the housing.
3. Then remove the screws and set aside for later reassembly.
4. Grasp the lid and fold it completely backwards.
5. Remove all three carbon filters from the housing.
6. Insert the new carbon filters into the housing.
7. Close the lid and fasten it firmly to the housing with the fastening
screws.
8. Close the drawer.
9. Dispose of used carbon filters according to local waste disposal
regulations.
Hexagon wrench (Allen key) set
Operator
Hexagon wrench (Allen key) set, 3 carbon
filter
Operator
26 │ 29

Advertisement

Table of Contents
loading

This manual is also suitable for:

D washP washSheraprint wash3dewash

Table of Contents