Blue Robotics BlueROV2 Installation Manual page 7

5/20/2019
(https://www.bluerobotics.com/wp-content/uploads/2019/03/heavy-tutorial-5.jpg?x62571)
7. Remove the Vent Plug from the Vent Penetrator Bolt on the electronics enclosure.
8. Remove the Aluminum End Cap with 14 Holes by removing the six M3x12 screws using the M2.5 hex driver. Place
the M3x12 screws, clips (small L-shaped parts) in a safe place.
https://www.bluerobotics.com/learn/bluerov2-heavy-configuration-retrofit-kit-installation/
BlueROV2 Heavy Configuration Retrofit Kit Installation - Blue Robotics
Privacy - Terms
7/28