Advertisement
5/20/2019
(/wp-content/uploads/2019/03/heavy-tutorial-10.jpg?x62571)
2. Connect the motor power wires from the thrusters 7 and 8 to the motor terminal blocks as shown, using your 2
mm at head screw driver.
https://www.bluerobotics.com/learn/bluerov2-heavy-configuration-retrofit-kit-installation/
BlueROV2 Heavy Configuration Retrofit Kit Installation - Blue Robotics
Privacy
-
Terms
12/28
Advertisement
Need help?
Do you have a question about the BlueROV2 and is the answer not in the manual?
Questions and answers