Getting Started; Connecting Your Xdj Controller - ICON XDJ User Manual

Getting Started

Connecting your XDJ controller

1. Connect the XDJ to your Mac/PC via the USB port

Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB
cable. Connect the cable's small jack end to the XDJ. Your Mac/PC should
automatically "detect" the new hardware and notify you that it is ready to use.
2. Setup your DJ software

Activate the ICON XDJ controller in your DAW or MIDI software using "MIDI
setup" or "MIDI devices".



Note: Every application does this a little different, so refer to your software user
manual for the settings.
3. Import the preset template for the DJ software

To avoid all hassles to set the midi mapping for your DJ software. We have
created preset templates on some DJ software. By importing this template to
your DJ software, your XDJ is ready to use immediately. Also, we will update
and create more templates for different DJ software. Please check our official
website for updates.
XDJ
,B4MJ6
11