Getting Started; Connecting Your Platform M Controller - ICON PLATFORM M Plus User Manual

Getting Started

Connecting Your Platform M
LED① = Nuendo Connect the Platform M
2
LED② = Cubase

Choose a USB port on your Mac/PC and insert the wide (flat) end of the USB
LED③ = Logic Pro

cable. Connect the cable's other end to the Platform M

automatically "detect" the new hardware and notify you that it is ready to use.
1. Select the DAW at Platform M
4

Press << (channel 6's "Sel" button)/>> (channel 7's "Sel" button) to scroll through

the DAW list, and then press the "DAW" (channel 8's "Sel" button) button to

make the selection.

The DAW name will display on the LCD while you are scrolling through the

list to make the selection if Platform D / Platform D2 (optional) is installed.
Otherwise, the 9 channel's LED indicator lights located on the top will indicate the
DAW. The sequence is as follows:

Channel 1 LED: Nuendo

Channel 2 LED: Cubase

Channel 3 LED: Logic Pro

Channel 4 LED: Samplitude

Channel 5 LED: Ableton Live

Channel 6 LED: Pro Tools

Channel 7 LED: User define

Channel 8 LED: Reaper

Channel 1+2 LEDs: Studio One

Channel 3+4 LEDs: Reason

Channel 5+6 LEDs: Bitwig

Channel 7+8 LEDs: Sonar

Channel 1+2+3 LEDs: Audition



Tip: Platform M

same mode a few seconds after it has been switched on. (i.e. DAW mode

selection is not needed if the last mode is being used.)
4
+
LED④ = Samplitude to your Mac/PC via the USB port
LED⑤ = Ableton Live
LED⑥ = Pro Tools
+
will memorise your last selected DAW mode and re-enter the
+
Controller
3
1
2
LED⑦ = User define
LED⑧ = Reaper
LED①+② = Studio One
+
. Your Mac/PC should
+
.
Tab
CapsLook
Shift
Ctrl Alt AltGr Ctrl
intel
LED③+④ = Reason
LED⑤+⑥ = Bitwig
9