Problems When Changing Batteries - Creative CardCam Value Getting Started

If you select more than one
application, you will be
prompted to choose one of
them when you press the
Snapshot button.
Problems when
changing
batteries
When the camera is connected to the computer, pressing the Snapshot button does
not start an application.
The application to be activated has not been pre-selected. Make sure that you have
selected an application for taking pictures.
Do the following:
1. Click Start -> Settings -> Control Panel.
2. Double-click the Scanners & Cameras icon. The Scanners & Cameras
Properties dialog box appears.
3. Click the Devices tab.
4. Click Creative CardCam Value (Video), and then click the Properties button.
The Creative CardCam Value (Video) Properties dialog box appears.
5. Click the Events tab.
6. Make sure that the Disable device events check box is not selected.
7. In the Camera events box, click Open Application.
8. In the Send to this application box, click Ulead Photo Express and/or other
applications that you want to activate by pressing the Snapshot button.
When inserting batteries into the camera and turning it on, or docking it to your
computer, you may see partially lit LCD segments. The computer fails to detect the
camera. The camera may freeze and stop responding to controls. Replacing the
batteries with fresh new cells does not solve the problem.
When changing batteries, make sure you insert fresh new batteries. Inserting weak
or faulty batteries may cause this condition to occur.
Do the following:
Remove all batteries and wait for at least three minutes before inserting fresh
new batteries.
Turn on the camera.
Troubleshooting B-4