Table of Contents
Advertisement
LCD display modes
The 640 x 480 resolution is
achieved via software
interpolation.
Enabling Audio
Cues
Snapshot button
This button is used for taking photos. Press the button to take a picture. It is
also used with the Power/Mode button to switch between or select settings.
By default, the LCD counter displays the number of pictures taken. If the Power/
Mode button is pressed for 1 second, the screen will display the number of pictures
left, followed by the mode, and then the number of pictures taken.
Depending on which mode you are in, this counter displays the total number of
photos taken, the mode, or the number of shots left.
The following abbreviations are found on your Creative CardCam Value's LCD
picture counter:
• Single snapshot (high resolution 640 x 480 pixels)
• Single snapshot (low resolution 320 x 240 pixels)
• Time-delayed exposure at a 10-second delay (320 x 240 pixels)
• Multiple snapshots at 5 shots per second (320 x 240 pixels)
• Erase Last image
• Erase All images
• Audio Cue mode
• Battery flat
The Audio Cues feature uses the camera's built-in buzzer for generating beep tones
to notify you of an important operational status. See "Audio/visual indications" on
page A-3. To enable your camera's audio cues, press the Power/Mode button until
is displayed on the LCD. Then press the Snapshot button to turn audio cues on
or off.
About your Creative CardCam Value
1-5
Advertisement
Table of Contents
