Inserting Or Changing Batteries - Creative CardCam Value Getting Started

Inserting or
Changing
Batteries
• No batteries are required
when the camera is
connected to the
computer.
• If the camera is to be
connected to the computer
for a long period of time,
remove the batteries to
prevent battery leakage.
• Make sure that you insert
the batteries in the correct
direction. If not, they may
leak and cause damage to
the camera.
• Do not mix old batteries
with new ones or batteries
of different types together.
For Creative CardCam Value to function as a portable digital camera when
it is disconnected from the computer, you need to insert two 1.5 V AAA alkaline
batteries into its battery compartment.
To insert or replace batteries:
1. Press the Power button for two seconds to turn off the camera.
2. Holding the camera in one hand, push the
battery compartment cover catch inwards, and
then lift the cover up, as shown in Figure 1-3.
3. Remove the old batteries (if any).
4. Insert the new batteries according to the
directions shown in the battery compartment, as
shown in Figure 1-4.
5. Close the battery compartment cover and then
push the catch outward to lock the compartment
cover.
Figure 1-3: Opening the battery
compartment.
Figure 1-4: Inserting batteries.
About your Creative CardCam Value
Insert
batteries
in the
direction
of the
arrows
shown.
1-6