Inserting Or Changing Batteries - Creative PC-CAM 350 User Manual

Inserting or
Changing Batteries
• No batteries are required
when the camera is
connected to the
computer.
• If the camera is to be
connected to the computer
for a long period of time,
remove the batteries to
prevent battery leakage.
• Make sure that you insert
the batteries in the correct
direction. If not, they may
leak and cause damage to
the camera.
• Do not mix old batteries
with new ones or batteries
of different types together.
For PC-CAM 350 to function as a portable digital camera when it is disconnected
from the computer, you need to insert four 1.5 V AAA alkaline batteries into its
battery compartment.
To insert or replace batteries:
1. Press the Power button for two seconds to turn off the camera.
2. Holding the camera in one hand, push the
battery compartment cover catch inwards, and
then lift the cover up with your fingertip as
shown in Figure 1-3.
3. Remove the old batteries (if any).
4. Insert the new batteries according to the
directions indicated in the battery compartment,
as shown in Figure 1-4.
5. Close the battery compartment cover and then
push the catch outward to lock the compartment
cover.
Figure 1-3: Opening the battery
compartment.
Insert batteries
according to the
directions shown.
Figure 1-4: Inserting batteries.
Installing PC-CAM 350 1-6