In Windows Xp - Creative CardCam Value Getting Started

In Windows XP

6. Two Digital Signature Not
Found dialog boxes will appear,
one at a time, telling you that
Creative Creative CardCam
Value (Still Image) and
Creative Creative CardCam
Value (Video) (Figure 1-6) have
been detected.
7. Click the Yes button. The
Creative CardCam Value
Camera Configuration dialog
box appears.
8. Check the image in the Video
preview pane. If it flickers or
displays a series of dark bands, click the Cancel Flicker button.
9. Click the Finish button, and then restart your computer.
1. Do not connect Creative CardCam Value to your computer before installing the
drivers.
If you accidentally begin installation with Creative CardCam Value connected, the
Found New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the Creative CardCam Value CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer. Do
not restart your computer until all the drivers and applications are installed.
Figure 1-6: Digital Signature Not Found
dialog box.
About your Creative CardCam Value 1-10