In Windows Xp - Creative WebCam Pro User Manual

In Windows XP

At the time of this
product's release,
Microsoft strongly
encouraged companies
to submit their
hardware solutions for
certification. If a
hardware device driver
is not submitted, or
does not qualify, for
Microsoft certification, a
warning message
appears.
You may see this
message when installing
this driver. If you do,
you may choose to click
the Continue Anyway
button. Creative has
tested this driver on
Windows XP, and it does
not impair or destabilize
your computer.
If you need more XP-
related information, go
to the product web
site's Help or speak with
Creative Technical
Support staff.
8. Click the Finish button, and then restart your computer if you are prompted
to do so.
1. Do not connect Creative WebCam Pro to your computer before installing the
drivers.
If you accidentally begin installation with Creative WebCam Pro connected, the
Found New Hardware Wizard dialog box appears. Click the Cancel button.
2. Insert the Creative WebCam Pro CD into your CD-ROM drive.
3. Click the names of the drivers and applications you want to install on your
computer.
4. Follow the instructions on the screen to complete the installation. You may be
asked, after an application is installed, if you want to restart your computer.
Do not restart your computer until all the drivers and applications are
installed.
5. Connect Creative WebCam Pro's USB cable to an available USB port on your
computer (Figure 1-2). Place Creative WebCam Pro on top of your computer
monitor or another flat surface.
Windows automatically detects the device. Installation will be complete in a
while.
6. If the Found New Hardware Wizard dialog box appears, select Install the
software automatically (Recommended), and then click the Next button.
7. If a Microsoft warning dialog box appears, ignore the message and click the
Continue Anyway button.
8. Check the image in the Video preview pane of the Creative WebCam Pro
Camera Configuration dialog box. If it flickers or displays a series of dark
bands, click the Cancel Flicker button.
9. Click the Finish button, and then restart your computer if you are prompted
to do so.
Installing Creative WebCam Pro 1-5