Ec Declaration Of Conformity - Makita HM1801 Instruction Manual

Reinstall the cap and secure with the wrench.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be per-
formed by Makita Authorized Service Centers, always
using Makita replacement parts.
ACCESSORIES
CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita service center.
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Rammer
• Safety goggles
• Hammer grease
• Hex wrench
• Wrench 23
For Model HM1801
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60754, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Measured sound power level: 104 dB
Guaranteed sound power level: 106 dB
These sound power levels are measured in accordance
with Council Directive, 2000/14/EC.
Conformity assessment procedure: Annex VIII
Notified Body: TÜV Immissionsschutz und Energiesys-
teme GmbH, Registration No.1149
Vibration
The typical weighted root mean square acceleration value
2
is 16 m/s .
These values have been obtained according to EN60745.
Yasuhiko Kanzaki CE 2005
Director
For Model HM1810
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN60754, EN55014, EN61000
in accordance with Council Directives, 73/23/EEC,
89/336/EEC and 98/37/EC.
Measured sound power level: 104 dB
Guaranteed sound power level: 107 dB
These sound power levels are measured in accordance
with Council Directive, 2000/14/EC.
Conformity assessment procedure: Annex VIII
Notified Body: TÜV Immissionsschutz und Energiesys-
teme GmbH, Registration No.1149
Vibration
The typical weighted root mean square acceleration value
2
is 8 m/s .
These values have been obtained according to EN60745.
Yasuhiko Kanzaki CE 2005
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
Director
7