Specifications - Makita HM1801 Instruction Manual

ENGLISH
1 Switch lever
2 Indicator lamp
3 Bit with collar
4 Bit without coller
5 Bit
6 Tool retainer
7 Tool holder
8 When the bit is inserted

SPECIFICATIONS

Model
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for heavy chiselling and demolition
work as well as for driving and compacting with appropri-
ate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated in accordance with European Standard
and can, therefore, also be used from sockets without
earth wire.
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavor-
able mains conditions can have adverse effects to the
operation of other equipment. With a mains impedance
equal or less than 0.31 Ohms it can be presumed that
there will be no negative effects. The mains socket used
for this device must be protected with a fuse or protective
circuit breaker having slow tripping characteristics.
4
Explanation of general view
9 When the bit is retained
10 Notched portion
11 Tool retainer shaft
12 Barrel
13 Commutator
14 Insulating tip
15 Carbon brush
16 Hex wrench 5
HM1801
1,100
824 mm
30 kg
SAVE THESE INSTRUCTIONS.
Work area safety
1. Keep work area clean and well lit. Cluttered and
2. Do not operate power tools in explosive atmo-
3. Keep children and bystanders away while operat-
Electrical safety
4. Power tool plugs must match the outlet. Never
5. Avoid body contact with earthed or grounded sur-
6. Do not expose power tools to rain or wet condi-
7. Do not abuse the cord. Never use the cord for car-
17 Motor housing cover
18 Brush holder cap
19 Screwdriver
20 Cap
21 Wrench 23
22 Hammer grease
/II
dark areas invite accidents.
spheres, such as in the presence of flammable liq-
uids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
ing a power tool. Distractions can cause you to lose
control.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
faces such as pipes, radiators, ranges and refrig-
erators. There is an increased risk of electric shock if
your body is earthed or grounded.
tions. Water entering a power tool will increase the
risk of electric shock.
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk
of electric shock.
HM1810
1,100
824 mm
32 kg