Optional Accessories; Ec Declaration Of Conformity - Makita HM1802 Instruction Manual

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommended
for use with your Makita tool specified in this manual.
The use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Bull point
• Cold chisel
• Scaling chisel
• Clay spade
• Rammer
• Safety goggles
• Hammer / bit grease
• Dust extractor attachment
NOTE:
• Some items in the list may be included in the tool
package as standard accessories. They may differ from
country to country.
Noise
The typical A-weighted noise level determined according
to EN62841-2-6:
Model HM1802
Sound pressure level (L
Sound power level (L
Uncertainty (K): 1.85 dB (A)
Model HM1812
Sound pressure level (L
Sound power level (L
Uncertainty (K): 2.2 dB (A)
NOTE:
• The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
• The declared noise emission value(s) may also be used
in a preliminary assessment of exposure.
WARNING:
• Wear ear protection.
• The noise emission during actual use of the power
tool can differ from the declared value(s) depending
on the ways in which the tool is used especially
what kind of workpiece is processed.
• Be sure to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG905-1
): 86 dB (A)
pA
): 106 dB (A)
WA
): 86 dB (A)
pA
): 106 dB (A)
WA
ENG907-1
Vibration
The vibration total
determined according to EN62841-2-6:
Model HM1802
Work mode: chiselling
Vibration emission (a
Uncertainty (K): 2.0 m/s
Model HM1812
Work mode: chiselling
Vibration emission (a
Uncertainty (K): 1.5 m/s
NOTE:
• The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
• The declared vibration total value(s) may also be used
in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared value(s)
depending on the ways in which the tool is used
especially what kind of workpiece is processed.
• Be sure to identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).

EC DECLARATION OF CONFORMITY

For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
value (tri-axial vector
): 15.6 m/s
2
h, CHeq
2
): 9.7 m/s
2
h, CHeq
2
ENG900-1
sum)
ENG901-2
5