Kohler K-1663 Installation Manual page 6

4. Operating the Steam Control
Steam Control Operation
NOTE: The clock is always on when the steam is off.
Push the "On/Off" button to start the steam.
When the button is pushed, the green LED light on the "On/Off" button turns on.
The LED window displays "On" until the temperature reaches 90° F (32° C). The current
temperature is displayed until the target temperature is reached.
Push the "On/Off" button again to stop the steam. The green LED "On/Off" button turns off and
the LED window displays "Off" for 5 seconds, then returns to the time of day.
NOTE: When turning the unit on, the steam duration and temperature settings will be based upon the
previous user settings. The setting of a new control unit is 113° F (45° C) for 20 minutes.
Steam Control Adjustments
Push the Temp icon and the LED flashes the previous setting.
To adjust the setting, press the up arrow to increase the temperature and the down arrow to
decrease the temperature.
After 5 seconds, the flashing stops and ambient temperature is displayed as it changes to the target
temperature.
Push the Timer icon and the LED flashes the previous setting. Press the up or down arrows to
adjust the setting. After 5 seconds, the flashing stops and the timer setting is displayed.
Push the Clock icon and the LED flashes the current time of day setting. Press the up or down
arrows to adjust the clock. After 5 seconds, the flashing stops and the set time is displayed.
Press the "On/Off" button to stop the steam and exit at any time.
To toggle the temperature reading between Fahrenheit and Celsius, push and hold the temperature
icon for 3 seconds.
NOTE: If the control needs to be removed, use piano wire to cut through the silicone sealant. Carefully
run the wire behind the control using a sawing motion. Work the wire around the connection wires.
1008020-2-B
Increase
Clock
Timer
Window
Decrease
On/Off
Temperature
6 Kohler Co.